Skip to main content

EDA: RPAS automation project helps set European standards.


| 2020

Mission accomplished for European Defense Agency’s ‘Enhanced RPAS Automation’ (ERA) project launched in 2016 by EDA on behalf of Germany, France, Italy, Poland and Sweden. The project aimed at standardising a set of key technical enablers for the operation of both civil and military RPAS in Europe and was formally closed at today’s 4th online stakeholder workshop, where its results were reviewed.

Follow Air Recognition on Google News at this link


EDA RPAS automation project helps set European standards The validation activities required for standardization purposes were successfully carried out and nearly all performance and functional requirements were validated by the simulations, review, analysis, and flight tests (Picture source: EDA)


ERA has contributed to setting industry standards that provide the technical and procedural baseline for the certification in Europe of automatic take-off and landing, autotaxi and automation and emergency recovery functionalities. The validation activities required for standardization purposes were successfully carried out and nearly all performance and functional requirements were validated by the simulations, review, analysis, and flight tests.

The relevant information for standardisation has been provided to the European Organisation for Civil Aviation Equipment (EUROCAE). Finally, ERA’s consortium has led the standards’ development, following EUROCAE’s standardisation process and involving a broader stakeholder community, including the European Aviation Safety Agency (EASA). In the safety context, ERA has proposed the bow-tie methodology for the Operational Safety Assessment, as requested by the current EUROCAE guidelines. This methodology offers the advantage to get a complete picture of the hazards relevant to the whole operation, which include, but are not limited to, system failures.

These standards will be published by EUROCAE towards the end of 2020, once the open consultation, the last step in EUROCAE’s standardisation process, is accomplished. This would enable both Civil and Military Aviation Authorities to recognize these EUROCAE standards and include them in their certification basis for RPAS operations in Europe.
Follow on activities

The project originally involved a test campaign with an ultra-light manned aircraft that could not be accomplished due to several technical issues with the test aircraft in the final phases of the project. These problems together with the COVID-19 crisis during this period, forced the cancellation of the ‘Automatic Take-off and Landing’ and ‘Autotaxi’ demonstrations. These tests to be performed with a representative RPAS are now proposed as a follow-on activity.

Furthermore, regarding the Operational Safety Assessment, supporting EASA on the definition of Safety Assessment guidelines for RPAS in the certified category could be also envisaged for a potential next phase of the ERA project.

Background

The ERA industrial consortium was led by Airbus Defence and Space, and composed of sixteen partners from five EDA Member States: Airbus Defence and Space and ESG Elektroniksystem- und Logistik-GmbH from Germany; Safran, Thales and ONERA from France; Saab from Sweden; Leonardo from Italy; and nine partners from Poland: Air Force Institute of Technology (leadership Polish consortium), Institute of Aviation, Hertz Systems Ltd., EUROTECH, PIAP (Przemysłowy Instytut Automatyki i Pomiarów), Eskadra Grzegorz Trzeciak, Politechnika Rzeszowska (Rzeszow University of Technology - RUT), WB Electronics S.A., Asseco Poland S.A.


Copyright © 2019 - 2024 Army Recognition | Webdesign by Zzam